facebookInstagramTikTokYou Tube

Superior Hollow Bar Tie Rod Suitable For Toyota LandCruiser 60 Series (High Steer Only) - 60TIERMECAHSV2

Brand:  Superior Engineering Product ID:  7890
SKU:  60TIERMECAHSV2

$370.00  (Each)

Supply Only Price.

-+
|

Street Legal under ADR NCOP

This is an adjustable Superior Tie Rod Suitable For Toyota LandCruiser 60 Series (High Steer Only) 4WD vehicle.

Tie rods are made from High Tensile Steel Bar that is extremely strong compared to factory items.

33 od High Tensile Steel Bar and finished in an anti-corrosion zinc finish.

The tie rods come complete with tie rod ends.

For use with a high steer setup.

***This Component is to be Used in Custom Applications Only – Does Not Suit Vehicles With OE Steering & Suspension Setups***

This kit/component requires heavy modification of your existing/OEM steering & suspension components for compatibility, including but not limited to a “Spring Over Axle” Conversion.

Due to the custom nature of these required modifications, and the varied ways in which they can be achieved, Superior Engineering cannot offer specific installation instructions for this kit.

Superior Hollow Bar Tie Rod Suitable For Toyota LandCruiser 60 Series (High Steer Only) (Each) - 60TIERMECAHSV2

Superior Engineering now includes ITS Seal Technology on internally threaded adjustable suspension linkages, eliminating the ingress of moisture or liquids that can cause corrosion or rust.

By adding a specially machined seal groove and incorporating a hydraulic seal between the locking nuts, the thread and the link, a perfect pressure-tight seal is created.

This patented process (PN-2015101600) is EXCLUSIVE to Superior Engineering's internally threaded items such as tierods, draglinks, Panhard rods and control arms (upper and lower).

Gen 2.0 Logo

ITS Seal Tech Diagram

Patent Number:2015101600

Superior Hollow Bar Tie Rod Suitable For Toyota LandCruiser 60 Series (High Steer Only) (Each) - 60TIERMECAHSV2

PLEASE READ:
Superior Engineering and other Brands of Steering components are replacement items that are in most
cases upgraded to be a stronger better choice than the factory item. The Superior Engineering steering
Components will meet or exceeds the factory specifications of OEM products. Although Superior
Engineering and other brands may be stronger or exceed OEM specifications maintenance must still be
performed on the components to ensure a safe and reasonable life out of the products.

For all steering products, it is recommended to carefully check over the ends, internal and external
threads and on hollow bars inside the rod every service you have on the vehicle or 6 monthly minimum
to ensure nothing is loose or damaged or rusted. It is recommended to ensure no rust has formed on
any steering parts as this may shorten the life or warranty of the product. Due to the harsh
environments such as beach work or general 4wding rust may quickly form on steel steering
components, it is recommended to replace the items if rust is present.
If there is any wear or “play “in the ball joints, Tie rod ends or threads they must also be replaced for
safety.

Due to shortages in steel supply at this current time, this product may be supplied in either of the finishes shown in the image below.
We are not able to guarantee which finish will be supplied but they are both of the same tensile strength and carry the same warranty.

Superior Hollow Bar Tie Rod Suitable For Toyota LandCruiser 60 Series (High Steer Only) (Each) - 60TIERMECAHSV2

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Vehicle Information
Lift Height0-2 inch|3 inch|4 inch|5 inch|6 inch|6 plus inch