24+ YRS EXPERIENCE IN THE 4WD INDUSTRY 
OVER 12,500 4WD PRODUCTS ONLINE 
20+ STOCKISTS AUSTRALIA WIDE 
SHIPPING AUSTRALIA WIDE & INTERNATIONALLY 
Superior Strut Spacers 20mm Lift Front Suitable For Ford Ranger PY Ute 06/2022-On - SSST-B-RAN06
Brand: Superior Engineering
Product ID: 56459
SKU: SSST-B-RAN06
Select your vehicle to check fitment.
This item is considered legal for use under NCOP VSB 14 / QCOP general rules. CLICK HERE for more info on Superior Engineering Street Legal Products.
$103.00 (Pair)
Supply Only Price.
Estimate Shipping
Product Info
Sometimes you don’t need a full lift kit, just a little extra clearance to balance your Ranger after fitting accessories like a Bullbar, dual batteries, or larger tyres. The Superior 20mm Strut Spacers offer a simple, effective way to raise the front end of your Ford Ranger PY without affecting factory ride quality or geometry.
Manufactured from 10mm 350GR mild steel and coated in SA5 zinc for corrosion resistance, these spacers fit between the top of the factory strut and chassis to give a clean 20mm lift. They’re engineered to maintain the handling characteristics of the Ranger while providing extra clearance for moderate modifications.
If you’ve noticed a slight nose-dive after adding accessories or want to correct uneven ride height for larger tyres, these spacers are ideal. They’re also perfect for owners who want a subtle lift without the cost and complexity of a full suspension upgrade.
Key Benefits
- Adds a clean 20mm lift to the front suspension
- 10mm 350GR mild steel for strength and durability
- SA5 zinc-coated for long-term corrosion protection
- Maintains factory ride feel and geometry
- Compact and straightforward bolt-on installation
Important Notes
A quick, reliable solution for Ranger owners looking to level or lift their vehicle slightly without compromising ride quality.
Note: It is only recommended to use strut spacers on standard length struts, you must check down travel, make sure the cv's do not bind and there are no fouling issues with steering components and no steering components move past their maximum working angles, if cv binding is found then a diff drop must be fitted.
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
| Product Specs | |
| Lift Height | 0-2 inch |
| Vehicle Information | |
| Spacer Height | 20mm |