Supply Only Price
(Unless stated otherwise above)
NOTE: This product is a universal fitment and may not suit all applications, please contact us if you are unsure if it is suitable.
Super Compact UHF CB Radio with LCD SoundPath™ Speaker mic
The TX3350 is an 80 channel, feature packed super compact UHF CB radio with the new SoundPath™ full function LCD Speaker Microphone.
The challenge was to create a unique solution that allowed a full function LCD Microphone that could house a built in speaker with clear audio all within a compact and ergonomic design. SoundPath™ diverts the audio through a unique convex path around the microphone bollard, whilst maintaining the compact size.
The TX3350 combines the unique combination of space saving benefits of a super compact size radio and full function speaker microphone all in the palm of your hand. The radio can now be discretely installed in almost any location within a vehicle and without the need for extension speakers.
- Powered by Pure Sound DSP engine
- Full spectrum backlit LCD microphone with Soundpath speaker
- User selectable open and group scan
- User adjustable squelch
- User selectable duplex channels
- User selectable priority channel
- 104 in-built DCS codes
- 50 in-built CTCSS codes
- 5 digit selcall with quiet mode
- Five year warranty
- Australian design and manufacture
In the Box:
- Radio unit
- Mounting cradle
- 634B LCD Speaker microphone
- Microphone clip
- DC lead
- Screw pack
- Instruction manual
|Compliant Specification||Meets AS/NZS 4365 for radio communications equipment in the UHF citizen and personal radio service.|
|Frequency Range TX||476.425 – 477.4125 MHz|
|Number of Channels||80 UHF CB|
|Channel Spacing||12.5 kHz|
|Operation Mode||Simplex channels 1–80 Semi Duplex channels 1–8, 41–48.|
|Scanning Speed||20 channels per second|
|Antenna Impedance||50 Ohms nominal|
|Nominal Battery Voltage||13.8 volts DC|
|Operating Voltage Range||10–15 volts DC|
|Overvoltage Protection||25 volts DC max. At 18 volts DC the RF power is reduced, and the words ‘Hi DC’ flash.|
|Overcurrent Protection||In-line 2A Fuse|
|Frequency stability||±2.5 PPM|
|RF Output||5.0 watts max.|
|Maximum Deviation||<± 2.5 kHz at + 20 dB limiting|
|Transmit Frequency Response||+6 dB per octave 300 Hz to 3 kHz + 1-3 dB.|
|Current Consumption||1.5 amps with 50 Ohms termination|
|Intermediate Frequencies||1st - 21.54, MHz 2nd - 450 kHz|
|Sensitivity||-123 dBm for 12 dB SINAD unweighted|
|Selectivity||-6 dB at + 3.5 kHz ‑60 dB at ± 12.5 kHz|
|Intermodulation Immunity||73 dB|
|Blocking Immunity||100 dB|
|Spurious Response Immunity||70 dB|
|Audio Output Power||3 watts average into 4 Ohms|
|Current consumption||< 180 mA muted 600 mA @ max. A.F output|
|Receive Frequency||-6 dB/Octave de‑emphasis, 300 Hz to 3 kHz + 1-3 dB|
|Conducted Spurious Emission||<-57 dBm|
|Dimensions||102 (W) x 87 (D) x 23 (H) mm|
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
|Lift Height||All Heights|