24+ YRS EXPERIENCE IN THE 4WD INDUSTRY 
OVER 12,500 4WD PRODUCTS ONLINE 
20+ STOCKISTS AUSTRALIA WIDE 
SHIPPING AUSTRALIA WIDE & INTERNATIONALLY 
Cognito Elite Lift Kit with King 2.5 Reservoir Shocks 4 Inch (100mm) Lift Suitable For Chevrolet Silverado/Sierra 2500/3500 2020-25 - 510-P1179
Brand: Cognito Motorsports
Product ID: 55719
SKU: 510-P1179
Select your vehicle to check fitment.
Each Kit Features:
- Yields 4-inches of front lift and 2 inches of rear lift
- Cognito Block and U-Bolt Kit
- SM Series Ball Joint Upper Control Arms
- Patented Pitman and Idler Arm Support Kit
- King 2.5 Reservoir Shocks with compression adjusters
- Maintains Adequate Droop Travel for Superior Ride Quality
- Allows for up to a 37x12.50 Tire on a 9-Inch Wide Wheel with 5.5-inch backspacing
$17,100.00 (Kit)
Supply Only Price.
Estimate Shipping
We have bundled everything you need in a lift kit for your Silverado/Sierra 2500/3500 2WD/4WD with high quality Cognito components. There is no guesswork. Cognito components are engineered, manufactured, and assembled in the USA.
The Cognito Ball Joint SM series Upper Control Arms add style, function and performance to your vehicle by correcting the Ball Joint angle for lifted and leveled applications and improving the allowable droop travel for a better ride quality. The boxed sheet metal arms are welded, and powder coated semi-gloss black. Pre-installed maintenance free ball joints and pivot bushings are included.
The Cognito Pitman and Idler Arm Support Kit: Pitman and Idler arms have been an inherent wear problem within the steering systems of Chevy and GMC trucks and SUVs for decades. The Cognito PISK (Pitman and Idler Arm Support Kit) replace the problem components that plague factory and aftermarket steering systems on several models and years of GM trucks and SUVs. These improvements are accomplished through application of Cognito's innovative, patented design, by providing additional support to the vehicle's pitman and idler arms, which eliminate the forward and rearward movement of the center-link.
The Cognito 2-inch Block and U-Bolt Kit includes 2-inch tall powder coated semi-gloss black cast steel blocks and heavy-duty zinc plated U-bolts
King's new line of Original equipment manufacturer shock upgrade kits provide a bolt on suspension system that elevates your on and off-road performance to unmatched levels. Each kit has been subjected to punishing real world testing to develop the optimal damping curves and spring rates for your vehicle.
Built with the same quality of materials and precise tolerances found on our high-end race shocks our OEM upgrade kits enable you to experience the famous King ride quality on your daily driver or prerunner. Built with race winning design features our kits come complete and provide simple 100 percent bolt on installation with no cutting or welding done to your vehicle. Our front kits provide an adjustable ride height and up to a 25 percent increase in wheel travel.
Rear kits typically allow a 15 percent travel increase. Large 2.5-inch diameter shock bodies and external reservoirs dramatically increase fluid capacity and heat dissipation to provide sustained damping performance even under the most punishing conditions. These King's OEM upgrade shocks feature the same serviceable design that allows for valve adjustments with simple hand tools just like our race shocks.
Tire Fitment
37x12.50 tire on stock 20” wheel
Will require a wheel spacer at least 1/4” thick. A 1.5” wheel spacer looks really good. Use tie back kit plus medium trimming.
35 on 10” wide wheel +18mm offset
Use tie back kit plus light trimming.
35 on 10” wide wheel, 0mm offset
Use tie back kit plus medium trimming.
37x12.50, 9” wide wheel +18mm offset
Use tie back kit plus light trimming.
37x12.50, 9” wide wheel, 0mm offset
Use tie back kit plus medium trimming.
37x12.50 on 10” wide wheel, +18mm offset
Use tie back kit plus medium trimming.
37x12.50 on 10” wide wheel, 0mm offset
Use tie back kit plus heavy trimming.
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.