Superior Nitro Gas Twin Tube Pre-Assembled Struts Front 2 Inch (50mm) Lift Suitable For Ford Ranger PY 2022 on - PGP7-AS-RAGPY

Name: Superior Nitro Gas Twin Tube Pre-Assembled Struts Front 2 Inch (50mm) Lift Suitable For Ford Ranger PY 2022 on - PGP7-AS-RAGPY
Brand: Superior Engineering
SKU: 61034
Price: 1205.99996 AUD
Availability: InStock
Rating: 4.4 (95 reviews)

Brand: Superior Engineering

Product ID: 61034

SKU: PGP7-AS-RAGPY

This product is vehicle specific.
Select your vehicle to check fitment.

Due to the extended length of this strut, it is recommended you run a shorter or adjustable Front Sway Bar Link to allow sufficient clearance from the Sway Bar to the Lower Control Arm are full droop.

We recommend this SuperPro Front Axle Sway Bar Link.

Pre-Assembled Struts – Ready to Install!

Take the hassle out of your suspension upgrade with Superior Pre-Assembled Struts. Supplied with your choice of coil springs and strut tops, each unit comes set up and ready to bolt straight in.
We do the hard work so you don’t have to – no spring compressors, no fuss.

Custom coil options to match your vehicle’s setup and load
Professionally configured; no specialist tools required – just install and drive

Calculate Your Ideal Spring Rate & Maximum Load in Seconds

OPEN SPRING CALCULATOR

*Have you utilised the above Spring Calculator and know your required spring loads?

Yes

*Please Select Front Load for Spring Rate

$1,206.00 (Pair)

Supply Only Price.

Estimate Shipping

Description

A twin-tube design with a 40mm piston and a 20mm shaft provides excellent performance and is designed to give a more comfortable and improved ride.

Low-pressure Nitrogen Gas prevents cavitation of oil inside the shock when it heats up during use over rough roads, allowing the shocks to work more consistently.

The piston has a Teflon coating, allowing it to slide smoothly with less friction.

Highly polished Chrome shaft ensures long shaft life.

The shock absorber velocity sensing valve can accurately control the required damping force for different conditions.

High-quality seals are designed to protect against oil leaks and perform very well even in dusty and dirty conditions.

40mm Piston

Our Superior Nitro Gas Shocks feature a robust 40mm Teflon-coated piston, engineered for enhanced durability and smooth operation. These shocks also incorporate a sophisticated velocity sensing valve stack, designed to provide optimal damping performance by automatically adjusting to changing driving conditions, ensuring a superior ride quality and improved handling.

Shock Shaft

The 20mm steel shaft features a high-polish, chromium-plated finish, specifically engineered for long-lasting durability and resistance to corrosion. This ensures optimal performance and an extended lifespan even under demanding conditions.

Nitrogen Gas Charged

Nitrogen Gas (Nitro Gas) charged to minimize cavitation during the high-speed oscillations encountered in off-road conditions, ensuring consistent performance and stability.

Welded Pins & Eyes

Superior Engineering Nitro Gas shocks feature fully welded pin and eye ends, a design choice that surpasses the spot weld system used by some other shock manufacturers. This robust welding method significantly reduces the likelihood of shock failures.

Twin Tube Design

The twin-tube design allows for increased oil capacity without the need for remote reservoirs, effectively maintaining cooler operating temperatures during off-road use. This design ensures better performance and longevity of the shock absorbers under demanding conditions.

Rubber Shaft Boot

All Superior Nitro Gas shocks come equipped with silicon rubber protective boots. These boots safeguard the shocks from rocks and other debris that could potentially damage the shaft or seals, ensuring enhanced protection and longevity of the shocks.

Features

Highly polished Chrome steel shaft is 20mm in diameter
All bushes are made from durable rubber, rather then polyurethane.
Welded pins and eyes ensures a strong mounting point for the shocks
All 40mm Gas Shocks are supplied with a protective rubber boot

Videos

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.

Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.