Lovells GVM Upgrades Suitable For Toyota LandCruiser 300 Series - TOYKIT086-GVM-XXX

Brand: Lovells Suspension	Product ID: 47169
SKU: TOYKIT086-GVM-XXX

Available Options

Please acknowledge that this kit can only be engineered at Superior Engineering or our authorised stockists for QLD registered vehicles only!

I Agree

GVM Options

Has this vehicle been previously registered in this state or any other?

$3,630.00 (Fitted)

Supply Only Price.

qty :

Lovells GVM Upgrades Suitable For Toyota LandCruiser 300 Series OE 3280kg GVM/6750kg GCM

Options

3560kg GVM/7060kg GCM with 40mm Twin Tube Nitro Gas Legend Series Shocks - TOYKIT086-GVM-CMFT
3800kg GVM/7300kg GCM with 40mm Twin Tube Nitro Gas Legend Series Shocks - TOYKIT086-GVM
4200kg GVM/7700kg GCM with 46mm Monotube Adjustable Remote Reservoir Platinum Series Shocks - TOYKIT087-GVM-PLAT

Disclaimer: These kits are designed to be used with a constant load at GVM

PLEASE READ: There are options for Pre and Post Registration.
Pre Registration is for vehicles that not have been previously registered in any Australian State.
Post Registration is for vehicles that have been previously or are currently registered.
NOTE: all GVM/BTC kits must be fitted by Superior Engineering and The vehicle must have a minimum Tyre Load Index of 110 to remain compliant.

The usable payload of many 4X4 vehicles today is minimal. Additional basic optional equipment and two or three adult male occupants will bring the vehicle close to its legal maximum weight (GVM) in many cases. Add long-range fuel tanks, bull bars, winches, side steps, roof racks, recovery gear and a payload of camping equipment or an industrial type custom body and the vehicle will ultimately exceed the Original Equipment allowable Gross Vehicle Mass.

Original Equipment suspension is designed for comfort above all other considerations, thus load carrying and performance can be compromised. Whereas, Lovell's design suspension systems with matched components for the ultimate in performance, load carrying, and handling.

Lovells GVM Upgrade suspension kits are fully track tested in conjunction with a Certified Automotive Engineering Signatory over many days to achieve maximum stability, braking performance, ADR (Australian Design Rules) conformity and operator comfort, before test data and documentation are forwarded to the DEPARTMENT of INFRASTRUCTURE, TRANSPORT, REGIONAL DEVELOPMENT and LOCAL GOVERNMENT for full analysis.

The National Codes and laws that must be met are extremely stringent and it can take up to 6 months for all data to be analysed in full by the Road Safety Engineers in Canberra. Once the Department is satisfied with all dynamic testing and theoretical data, it is only then that Lovells are issued with certification of Secondary Manufacture for GVM Upgrades.

Lovells GVM Upgrade Kits provide a solution for owners/managers of Toyota LandCruiser Toyota Hilux, Nissan Patrol and other vehicles who need to carry loads which exceed the Original Equipment GVM specifications while at the same time meeting the practical and documentary compliance requirements of Work Safety, Police Licensing, Insurance, Lessors and Fleet Managers.

Lovells hold Compliance Plate Approval’s as a Second Stage Manufacturer of GVM Upgrades for Toyota, Nissan, Isuzu, Ford and Mazda

WHY DO VEHICLES REQUIRE G.V.M (Gross Vehicle Mass) SUSPENSION UPGRADES?

Need to protect Business, Managers from claims for breaches of OH&S rules and employee negligence.
Possibility of Insurance companies to void payout if the vehicle is loaded beyond approved GVM.
Possibility of litigation under common law if the vehicle is operated beyond its legal Load Limits.
Requirements to load vehicle and operate safely with weight beyond current Original Equipment limits for heavy and/or remote work.

Lovells GVM Upgrade
Image is for sample only actual content may vary(see parts lift for actual content)

Kit Part List

TOYKIT086-GVM-CMFT

2 x Lovells heavy duty front coil springs.
2 x Lovells heavy duty rear coil springs.
2 x Lovells front gas legend twin tube shock absorbers.
2 x Lovells rear gas legend twin tube shock absorbers.
1x Federal SVI (Secure Vehicle Identification Placard) with revised GVM and upload onto the Federal RAV System for Pre-Registration vehicles only.
1 x Tyre loading placard (Decal) with revised axle capacities.
1 x GVM upgrade owners manual.
1 x Fitting instruction manual.

TOYKIT086-GVM

2 x Lovells heavy duty front coil springs.
2 x Lovells heavy duty rear coil springs.
2 x Lovells front gas legend twin tube shock absorbers.
2 x Lovells rear gas legend twin tube shock absorbers.
1x Federal SVI (Secure Vehicle Identification Placard) with revised GVM and upload onto the Federal RAV System for Pre-Registration vehicles only.
1 x Tyre loading placard (Decal) with revised axle capacities.
1 x GVM upgrade owners manual.
1 x Fitting instruction manual.

TOYKIT087-GVM-PLAT

2 x Lovells heavy duty front coil springs.
2 x Lovells heavy duty rear coil springs.
2 x Lovells front 46mm mono tube remote reservoir shock absorbers.
2 x Lovells rear 46mm mono tube remote reservoir shock absorbers.
1x Federal SVI (Secure Vehicle Identification Placard) with revised GVM and upload onto the Federal RAV System for Pre-Registration vehicles only.
1 x Tyre loading placard (Decal) with revised axle capacities.
1 x GVM upgrade owners manual.
1 x Fitting instruction manual.

Lovells Compliance Flyer

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.

Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.