24+ YRS EXPERIENCE IN THE 4WD INDUSTRY 
OVER 12,500 4WD PRODUCTS ONLINE 
20+ STOCKISTS AUSTRALIA WIDE 
SHIPPING AUSTRALIA WIDE & INTERNATIONALLY 
Superior Coil Springs 100mm Light Duty Suitable for Toyota Hilux 2015-07/25 Revo (N80)/Ford Ranger Coil Conversion Rear (Pair) - SUP-RA4CL-RLD
Brand: Superior Engineering
Product ID: 56843
SKU: SUP-RA4CL-RLD
Select your vehicle to check fitment.
$290.00 (Pair)
Supply Only Price.
Estimate Shipping
Superior Engineering's new coils are designed from the start purely for the best ride and performance available.
The design process started with on-vehicle measurements of the longest aftermarket shock for a given length, this data is then combined with the shock closed length and the suspension's actual physical limits.
Data is then combined with the highest grade of spring material offered in Australia, which gives us the ability to produce the longest possible spring whilst still adhering to the required vehicle dimensions for a given lift height.
What this means is you have a longer, slightly softer more linear spring that is captive in the spring seat even when using the longest recommended shock.
By having a spring that is not only captive but the linear rate at full extension you have good ground pressure even when at near full flex, which dramatically adds to vehicle stability when offroad.
The other major benefit of the longer, slightly softer rate is the far superior ride quality.
A short hard spring transmits forces from bumps back into the vehicle much more and doesn't allow the shock to actually do its job of controlling the motion of the suspension.
The Superior Springs are designed around the same technology as the Coilover race springs which when combined with good shocks will provide unparalleled performance levels.
For vehicles that may carry loads at particular times, we do recommend fitting Air-Bag assist.
This way both the ride and load-carrying characteristics can be easily adjusted to suit any condition or load requirement.
Sold as a pair.
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
| Product Specs | |
| Lift Height | 4 inch |