facebookInstagramTikTokYou Tube
Sale

Trail Gear Transfer Case Gears 4.7 Ratio 23 Spline (Each) - 105001-1-KIT

Brand:  Trail Gear Product ID:  4457
SKU:  105001-1-KIT
Available Options
RRP:  $1,223.00
Special Price:  $1,162.00  (Each)
SAVE:  $61.00

Supply Only Price.

-+
|

. For rock crawling, lower transfer case gears give you the control you need to keep your truck on track. Trail-Gear offers an affordable 4.70:1 gear kit for your gear driven Toyota transfer case. Trail-Creeper T-Case gears are available in 21 and 23 spline configurations. Kits include replacement gears, gaskets and seals. Disassembly and modification of transfer case is required for installation. Input gears are precision ground & micro-polished to guarantee the removal of all surface imperfections in the forging.

Trail-Creeper gears fit Toyota Hilux, Surf and 4Runners with gear drive style transfer cases. Gear sets reduce the stock low range from 2.28 to 4.70, nearly twice the the reduction of the stock gears. High range is not affected and remains 1 to 1. Each gear set carries a full lifetime guarantee. If your gears ever fail to function properly, simply return them to us for replacement.

Whats the Go with 21 or 23 Spline Configurations?

This refers to the spline count on the input shaft. Stock Hilux gear driven transfer cases are 21 spline, however if you are fitting this transfer case behind an R151 you will need a 23 spline input shaft. The other time you will want a 23 spline input shaft is when installing dual transfer case adaptors. The weakest link in a dual transfer configuration is the input shaft between the two cases. The 23 spline input shaft is stronger.

In Summary :

  • If you are running a single gear driven transfer case behind a G or W series transmission you will want the 21 spline gearset.
  • If you are running a single gear driven transfer case behing an R series transmission with the Chain to Gear drive adaptor then you will want a 23 spline gearset.
  • If you are running dual cases with reduction gears in the rear case it is recommended to go for the 23 spline gearset as the input shaft into the second case stronger.
    • Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

    Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


    Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
    All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

    Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

    Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
    Vehicle Information
    Lift Height0-2 inch|3 inch|4 inch|5 inch|6 inch|6 plus inch