Sale

Trail Creeper 29 Spline Gear Set with 29 Spline Flange Kit 4.88:1 (4cyl) (Each) - 304254-1-KIT

Brand: Trail Gear	Product ID: 31056
SKU: 304254-1-KIT

Available Options

Please Note: this item is imported from USA and may take 4-6 Weeks for delivery

I Understand

RRP:  $469.00
Special Price:  $446.00  (Each)
SAVE:  $23.00

Supply Only Price.

qty :

Trail Creeper 29 Spline Gear Set with 29 Spline Flange Kit 4.88:1 (4cyl)

This is the easiest and most affordable way to upgrade your Toyota 8" differential with stronger 29-spline Ring & Pinion gears. Includes your choice of Trail Creeper™ 29-Spline Ring & Pinion gears along with our 29-Spline Quadruple-Drilled Differential Flange with dust shield, 29-spline Trail-Safe™ Pinion Seal, and 29-spline pinion nut.

On Toyota trucks we recommend 4.88's for 33" tires and 5.29 for 35" and larger.

Fits 79-85 4WD Toyota axle 8" ring gear, and most 86-95 rear axles only.

Requires Ring & Pinion Setup kit to complete the installation into your existing differential housing.

RING & PINION BREAK-IN PROCEDURE

All new 3rd members require a break-in period to prevent damage from overheating. Any overloading or over-heating during this periods can cause the gear oil to break down resulting in-ring & pinion failure.

After installation drive lightly for 20-30 minutes and then allow the diff to cool for at least two hours.
Avoid heavy throttle use during the first 500 miles.
Do not tow a trailer during the first 500 miles.
Change oil after 500 miles to remove any particles suspended in the oil.

This may seem unnecessary but it is very easy to damage the differential by loading it before the gear set is completely run in. New ring & pinion gears create excess heat when they are new. This excess heat can damage the heat treatment of the gears.

Specifications

Made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.
29-Spline pinion spline is 7% larger in diameter than the 27-spline for increased strength.
Includes forged Chromoly 29-spline Quadruple-drilled flange with dust shield, 29-spline Trail-Safe™ Pinion Seal, and 29-spline pinion nut.
Flange is Quadruple drilled with the most popular Pickup/4Runner & Tacoma Patterns:
- 66mm x 66mm x 11mm (Tacoma)
- 60mm x 60mm x 10mm (Pickup/4Runner and TG Heavy Duty Driveline)
- 60mm x 68.3mm x 10mm
- 61.5mm x 70mm x 10mm
Dust shield pre-installed onto flange.
Available in 4.88 & 5.29 ratios for 4-cyl, V6, & high pinion applications.
Requires Ring & Pinion Setup kit to complete the installation into your existing differential housing.
For Toyota 8" solid axles only. Will not fit 7.5" IFS front axles.

Trail Creeper 29 Spline Gear Set with 29 Spline Flange Kit 4.88:1 (4cyl) (Each) - 304254-1-KIT

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.

Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.