24+ YRS EXPERIENCE IN THE 4WD INDUSTRY 
OVER 12,500 4WD PRODUCTS ONLINE 
20+ STOCKISTS AUSTRALIA WIDE 
SHIPPING AUSTRALIA WIDE & INTERNATIONALLY 
STEDI Rally Bar Suitable For Ford Ranger/Everest 2022 on - ST-11-FRD-005
Brand: STEDI Lights
Product ID: 52752
SKU: ST-11-FRD-005
Select your vehicle to check fitment.
$599.00 (Each)
Supply Only Price.
Estimate Shipping
THE NUDGE BAR RE-IMAGINED.
Not everyone wants a bull bar, and nudge bars are, well, ugly. Enter The STEDIâ„¢ Rally Bar to suit Next-Gen Ford Ranger & Everest. Featuring a powder-coated 60mm mounting tube made out of durable 2mm stainless steel, this lightweight nudge bar can securely hold up to 30kg without any compromise.
THE NEXT-GEN IS HERE.
The STEDIâ„¢ Rally Bar to suit Next-Gen Ford Ranger & Everest is designed for a reversible install with sensor, radar, and camera integration. Once installed, you can expect a higher mounting position than the factory counterpart and the optimal setup for a killer lighting combination. With slick styling and the perfect compatibility for the STEDIâ„¢ product range, our Rally Bar will seamlessly uphold your expectations while loudly showcasing the quintessential quality of STEDIâ„¢.
SPOTLIGHTS, AERIAL OR LIGHT BAR.
The STEDIâ„¢ Rally Bar to suit Next-Gen Ford Ranger & Everest is a perfect match for our 60-66mm Hex Brackets. The Hex is designed to reduce excessive mounting equipment, and when combined with the Rally Bar, provides the perfect solution for hosting your ideal light combination.
COMPATIBILITY.
Due to its longer design, the STEDIâ„¢ Rally Bar to suit Next-Gen Ford Ranger & Everest will allow you to mount multiple lighting combinations including:
- 2x Type-X EVO 8.5" LED Driving Lights + 2x Type-X EVO 7" LED Driving Lights
- 4x Type-X EVO 7" LED Driving Lights
- 4x Quad PRO LED Driving Lights
- 4x Type-X SPORT 7" LED Driving Lights
- 2x TYPE-X PRO LED Driving Lights
- Any STEDIâ„¢ LED Light Bar up to 28"
THE NITTY-GRITTY.
Not everyone wants a bull bar, and nudge bars are, well, ugly. Enter The STEDIâ„¢ Rally Bar to suit the Next-Gen Ford Ranger & Everest. Featuring a powder-coated 60mm mounting tube made out of durable 2mm stainless steel, this lightweight nudge bar can securely hold up to 30kg without any compromise. The STEDIâ„¢ Rally Bar to suit Next-Gen Ford Ranger & Everest is designed for a seamless fully reversible install with sensor, radar, and camera integration. Once installed, you can expect a higher mounting position than the factory counterpart and the optimal setup for a killer lighting combination. With slick styling and the perfect compatibility for the STEDIâ„¢ product range, our Rally Bar will seamlessly uphold your expectations while loudly showcasing the quintessential quality of STEDIâ„¢. The STEDIâ„¢ Rally Bar to suit Next-Gen Ford Ranger & Everest is a perfect match for our 60-66mm Hex Brackets. The Hex is designed to reduce excessive mounting equipment, and when combined with the Rally Bar, provides the perfect solution for hosting your ideal light combination.
ATTENTION:DO NOT turn on or move the car whilst any camera or radar systems are disconnected. Failure to observe this precaution will result in system errors that will need the car to be taken to a Ford Dealership to resolve.
Check out the comprehensive installation video here! (viewing time 15 minutes)
The Rally bar is not designed to offer protection to your vehicle and should not be considered for this purpose. The Rally bar is designed as a platform to allow the fitting of driving lights without the need for a frontal protection system (Bullbar). The Rally bar has been designed to comply with all regulations as set out in ADR 69/ and ADR 73/.
Kit also includes required holesaw bits to complete installation.
TECH SPECS
| LOAD CAPACITY | 30kg |
|---|---|
| MATERIAL | Stainless Steel (front tube) |
| THICKNESS | 2mm |
| TUBE DIAMETER | 60mm |
| PRODUCT WEIGHT | 10.5kg |
| COMPATIBILITY | Ford Next-Gen Ranger & Everest ONLY |
| INSTALLATION TIME | 2-3 HOURS |
WHAT'S INCLUDED
- 1 x STEDIâ„¢ Rally Bar to suit Ford Next-Gen Ranger & Everest (not compatible with Ranger Raptor)
- Mounting Hardware
- User Installation Guide
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
| Product Specs | |
| Lift Height | 0-2 inch|3 inch|4 inch|5 inch|6 inch|6 plus inch |
Recommended for you
$269.00 Ex Tax:$244.55