STEDI H1 Projector LED Headlight Globes - LEDCONV-PR-H1

Brand: STEDI Lights	Product ID: 49997
SKU: LEDCONV-PR-H1
High Stock

$155.00 (Pair)

Supply Only Price.

qty :

UNMISTAKABLY STEDI.

The optical design of a reflector headlamp is very different from that of a projector-based headlight. Designing LED headlight conversion, which is useful on both platforms, is a balancing act full of compromises. Enter our all-new Projector-specific LED upgrade "Project."

LET’S TALK ABOUT PERFORMANCE.

Our back-to-back tests on projector headlamps have yielded an average increase of 300% in peak intensity. Add to this the overall beam has incredible width, endless light volume, and is incredibly smooth free of any dominant shadows or hotspots.

FOCUSED PROJECTION.

One of the critical advantages of our projector-based headlamps is that the optical module is fitted with an internal cut-off shield, which keeps oncoming cars from being blinded by stray light scatter, this allows for a brighter light source to be leveraged without fear of poor light distribution.

Projector vs Reflector

DIMENSIONS

THE NITTY-GRITTY.

Let's talk about performance. Our back-to-back tests on projector headlamps have yielded an average increase of 300% in peak intensity. Add to this the overall beam has incredible width, endless light volume, and is incredibly smooth free of any dominant shadows or hotspots.

Vehicles like the Holden Commodore have incredibly small headlight dust-caps that present cooling and fit challenges. The integrative active cooling has been optimized to fit inside the tightest H1 headlight application.

KEY BEAM CHARACTERISTICS

CCT 5700K means colours sync with our auxiliary LED driving lights.

OEM matching light distribution through the exact positioning of the LED emitters to match the optical properties of the projector headlight.

One of the critical advantages of projector-based headlamps is that the optical module is fitted with an internal cut-off shield, which keeps oncoming cars from being blinded by stray light scatter, this allows for a brighter light source to be leveraged without fear of poor light distribution.

Instant full beam without any warm-up time.

Electrically Protected against Radio Frequency Interference and Electromagnetic Interference. We guarantee that our upgrade will not cause static radio noise.

Over and Under Voltage Protection

INSTALLATION.

Matching plug and play connectors to suit the vehicle OE H1 connector.

TECH SPECS

INPUT POWER	42W
BEAM ANGLE	270 °
COMPATIBLE VOLTAGE	9V to 22V DC
CURRENT DRAW	3.5A ± 0.2A (each) @13.6v
KELVIN	5700K
TESTED LUMENS	3,700LM (each)
COMPATIBILITY	Projector Lens only
FIT COMPATIBILITY	H1
COOLING EFFICIENCY	7500w / m.k

WHAT'S INCLUDED

2 x H1 STEDI PROJECT Headlight LED Conversion
User Instruction Manual

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.

Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.