facebookInstagramTikTokYou Tube

Car Builders Dual Cab Sound Deadening Packs - CB_DUAL_CAB_SD_PACKS

Brand:  Car Builders Product ID:  45610
SKU:  CB_DUAL_CAB_SD_PACKS
    
(Please select a product option above for the stock level indicator)

$625.00  (Pack)

Supply Only Price.

-+
|
Universal Product Banner

STANDARD PACKS

Pack 1 and 2 come with Waterproof Carpet underlay - a peel-and-stick closed cell foam that you stick on the Sound Deadener.

Pack 1 insulates everything but the roof, and Pack 2 adds on the roof insulation.


The Dual Cab Floor Pan, Doors Premium Pack 1 includes:

  • 3 Boxes (5.4sq/m) of Stage 1 Sound Deadener - Install on your floor pan, rear firewall & door skin. Cover from above your pedals, across the floor pan up the rear firewall to below the rear window. Remove the door trim and apply it to outer door skin.
  • 2 Boxes (3.6sq/m) Waterproof Carpet Underlay - Lightweight, closed cell, peel and stick foam. At 10mm the waterproof underlay will replicate your factory underlay, reduce heat transfer and will cover your floor pan.
  • 1 Box (1.7sq/m) Acoustic Liner - Peel & stick, 12mm thick flexible foam to cover the rear firewall.
  • 1 x Install kit - Includes 1 x application roller, 1 x utility knife, 1 x roll of foil tape
  • Bonus - Car Builders stubby holder and bottle opener!


The Dual Cab Floor Pan, Roof + Doors Premium Pack 2 includes:

  • 4 Boxes (7.2sq/m) of Stage 1 Sound Deadener - Apply to your floor pan, rear firewall, roof and door skins.
  • 2 Boxes (3.6sq/m) Waterproof Carpet Underlay - Lightweight, closed cell, peel and stick foam. At 10mm the waterproof underlay will replicate your factory underlay, reduce heat transfer and will cover your floor pan.
  • 1 Box (1.7sq/m) Acoustic Liner - Peel & stick, 12mm thick flexible foam to cover the rear firewall.
  • 2 Sheets (2sq/m) Insul-Layer- peel and stick foam creating a sound and heat barrier for your roof skin.
  • 1 Install kit - Includes 1 x application roller, 1 x utility knife, 1 x roll of foil tape
  • Bonus - Car Builders stubby holder and bottle opener!


PREMIUM PACKS

Pack 3 and 4 come with Mass Noise Liner - a premium non-stick underlay is closed cell foam with a 2mm thick mass-loaded vinyl layer on top.
This is waterproof as well, and utilising the vinyl layer as a sound blanket it blocks more sound than Waterproof Underlay.

Pack 3 insulates everything but the roof, and Pack 4 adds on the roof insulation.


The Dual Cab Floor Pan, Doors Premium Pack 3 includes:

  • 3 Boxes (5.4sq/m) of Stage 1 Sound Deadener - Install on your floor pan and rear firewall. cover from above your pedals, across the floor pan up the rear firewall to below the rear window.
  • 2.5 Sheets (3.8sq/m) Mass Noise Liner - Stage 2 Sound barrier to cover firewall and floor pan
  • 1 Box (1.7sq/m) Acoustic Liner - Peel & stick, 12mm thick flexible foam to cover the rear firewall.
  • 1 Install kit - Includes 1 x application roller, 1 x utility knife, 1 x roll of foil tape
  • Bonus - Car Builders stubby holder and bottle opener!


The Dual Cab Floor Pan, Roof + Doors Premium Pack 4 includes:

  • 4 Boxes (7.2sq/m) of Stage 1 Sound Deadener - Apply to your floor pan, rear firewall, roof, and door skins.
  • 2.5 Sheets (3.8sq/m) Mass Noise Liner - Stage 2 Premium carpet underlay works as a sound barrier to cover your entire floor pan from the front to the rear firewall.
  • 1 Box (1.7sq/m) Acoustic Liner - Peel & Stick closed cell foam to cover the rear firewall after applying the Stage 1 Sound Deadener
  • 2 Sheets (2sq/m) Insul-Layer- peel and stick foam creating sound a heat barrier for your roof skin.
  • 1 Install kit - Includes 1 x application roller, 1 x utility knife, 1 x roll of foil tape
  • Bonus - Car Builders stubby holder and bottle opener!


Car Builders Stage 1 Sound Deadener is a vibration (sound) dampening mat. It consists of a butyl rubber noise absorption layer combined with an aluminium top layer.

Each box has 12 sheets, each sheet is 300x500mm and 2mm-2.2mm thick.

Car Builders butyl based Sound Deadener does not require heating, does not smell, and will not go brittle over time, which are all qualities of old-style tar or bitumen sound-deadening materials.

Car Builders Sound Deadener has pressure-sensitive butyl rubber, which is inherently sticky eliminating the risk of an adhesive layer failing.


Features/Advantages

  • Easy installation - just peel off the release liner and roll it on
  • 100% waterproof - does not rot or deteriorate
  • Cuts with scissors or a knife
  • Reduces heat transfer
  • Conforms and fuses easily to all types of sheet metal
  • No odour


Applications

  • Under carpets
  • Roof skins
  • Inside cavities
  • 1/4 panels
  • Doors
  • Boots/trunks
  • Firewalls


Car Builders Mass Noise Liner is a 12mm thick, heavy-weight, acoustic barrier. This product is used over the top of sound deadening (stage 1) which is applied directly onto the sheet metal.
Sound deadening stops noise created by panel vibration whereas Mass Noise Liner (stage 2) reduces airborne noise generated from the engine, road, etc.
This premium carpet underlay is an OEM product used in high-end luxury vehicles. Mass Noise Liner replaces cotton jute or shoddy, creating far superior soundproofing results.


Construction

2mm Mass Loaded vinyl upper layer, coupled with a 10mm closed cell foam to create the most effective means of acoustic blocking.
Our flexible closed-cell foam is water-resistant and offers superior thermal insulation.


Features/Advantages

  • Heavy duty sound blocking
  • Water-resistant
  • Removable
  • Cuts with scissors and knife
  • Reduces heat transfer
  • Does not rot or deteriorate


Applications

  • Firewalls
  • Cargo areas
  • Van floors
  • Boot floors


It is not 100% necessary to put Stage 1 Sound Deadener underneath Mass Noise Liner on cargo area floors or van floors due to the metal already being fairly rigid from the ribs.
The Mass Noise Liner will be an effective floor soundproofing by itself.


Ideal for:

  • 4WDs and muscle cars - firewall barrier to reduce engine noise
  • Trucks - reduce engine noise and heat on floors and firewalls, great for serviceability
  • Exhaust drone - drop in as a boot liner to reduce exhaust drone particularly common in 6's, V8s, and flat fours.
  • Engine rooms, compressors, etc


Note: due to the weight of our Mass Noise Liner it is not recommended for use on the underside of horizontal surfaces.
For these applications, you should use our lightweight foam such as Acoustic Liner, Waterproof carpet underlay, Under bonnet insulation, or our 6mm Insul-layer.


Car Builders Acoustic Liner is a multi-layer open and closed cell foam with a peel-and-stick backing.
It offers a high level of acoustic and thermal insulation superior to that of traditional jute underlay.


NOTE: For all inverted applications, such as roof skins and vertical applications, we recommend applying our upholstery grade Spray Adhesive rate at 120°C.


Car Builders premium underlay is today's answer to predated jute and cotton mill scrap traditionally used under carpets. Acoustic Liner will not rot, or attract mould, is easy to cut, and does not require the application of glue (unless it is being laid in an inverted position).


Features/Advantages

  • Light Weight
  • Easy installation - just peel off the release liner and adhere it to the surface.
  • Cuts with scissors and knife
  • Reduces heat transfer
  • Does not rot or deteriorate


Applications

  • Under carpets
  • Inside cavities
  • 1/4 panels
  • Doors
  • Firewalls


PRE-CUT LandCruiser 79 Series Underlay and Rear Wall

We offer pre-cut floors and rear walls in our single and dual cab packs for the 79 series. This is only an option for premium packs 3 and 4. This includes:

  • Pre-cut Mass Noise Liner (premium carpet underlay)
  • Pre-cut Acoustic Liner foam for the rear wall

Sound Deadening FAQ

Q. What does sound deadener do?

A. Sound Deadener absorbs vibrations and adds mass to panels.
This process will make your car or van quieter as it will reduce the resonance of the panels, removing that tinny sound thin sheet metal panels have.
This will reduce echo and make the inside of the vehicle a much more comfortable place.


Q. What Sound Deadener is best?

A. Sound deadener is generally a misunderstood material. Normally the first stage of treating noise is referred to as ‘sound deadener’.
This stage only really treats vibration in panels.
It was often a bitumen-based product but more commonly consists of butyl rubber with an aluminium top layer.
Cheaper sound-dampening sheets consist of a lower-grade butyl, which is not as durable or resistant as those used by leading brands.
Butyl sheets by themselves, however, will not result in dampening droning or external noise that you may be more interested in treating.
This will be treated more successfully with mass-loaded vinyl.
If you are aware of the type of sounds that are annoying, you will be able to treat them more successfully with targeted products.


Q. What is sound dampening in vehicles?

A. This term is often confusing.
In physics, it means ‘restraining of vibratory motion, such as mechanical oscillations, noise, and alternating electric currents, by dissipation of energy.
In a general sense ‘dampen’ means to ‘make less strong or intense.
There are 5 common elements to reducing sound; absorption, damping, decoupling, distance, and adding mass.
Automotive structures limit the thickness of materials that can be used, but combinations of dampers, barriers, and absorbers are used to reduce sound.
Surface damping materials such as butyl-based sound deadening sheets are very effective at reducing structure-borne noise.


Q. Is Sound Deadening worth it?

A. Sound deadening is definitely worth it if you are in your vehicle a lot.
It results in a significant reduction in decibels allowing you to hear passengers better, improve sound system quality and reduce the strain of noise pollution on the body.


Q. Are bigger sound-deadening sheets better?

A. As installers, we find that 500mm x 300mm are a good size to deal with when installing.
The reality is that you will rarely have panels that have open, single-sheet metal panels larger than that.
Rather, more often, you will need to cut down sheets.
We have had rolls in stock before, however, it just results in more effort in cutting.


Q. What can I use for sound deadening in a car?

A. Our Stage 1 Sound Deadener is the first layer you need to apply when sound deadening a car.
We then have carpet underlays and other foam insulation that you can apply over the top to block sound and help insulate cold and heat.


Q. Is your Sound Deadener bitumen?

A. No, the adhesive product is butyl based. This has an advantage over the bitumen, which dries out, cracks and lifts allowing water to get underneath it and cause rust.
The butyl is a waterproof material ensuring that water cannot get between the Sound Deadener and the panel.
Bitumen also has a strong odour, which the Sound Deadener does not.


Q. Is there a difference in Sound Deadener colour variations?

A. No, the logo Sound Deadener (Silver or Black) and OEM versions are the same product simply with a different colour/print on the aluminium face.
Some customers are after the OEM finish in areas where the Sound Deadener will be exposed and they would prefer not to have logoing.


Q. Do I need to wipe the panel before applying Sound Deadener or underlay?

A. Yes, for a successful bond between the product and the panel; clean the panel with a white-based spirit such as wax and grease remover or methylated spirits.


Q. Does sound deadening need 100% coverage?

A. No, it is unnecessary to apply deadener to over-lapped metal sections, top hat, chassis sections etc as these areas do not resonate.
Moderate amounts of deadener make a significant difference. Once the middle of a panel has been covered, the additional deadener covering the panel has diminishing results.
To engineer a car, it takes some skill and technical analysis to pinpoint key areas that need sound deadening, auto manufacturers do this and save money by only covering key areas.
In reality, most people will cover everything as they do not mind spending a bit more to ensure they have achieved the desired results.
Keep in mind that this is one stage in controlling sound in your vehicle and stage 2 is just as crucial.


Q. Do I need to heat Sound Deadener when laying sheets?

A. No, it does not need a heat gun to be applied. The adhesive backing is butyl based not bitumen.


Q. Should I lay Sound Deadening sheets in some sort of order?

A. If you are doing the whole interior, we recommend doing the roof first and then any vertical panels and wheel arches.
Finish laying the floor pan last so that you are not standing all over the butyl you have laid on the floor.


Q. Will this Stage 1 Sound Deadener stop all noise?

A. Keep in mind that this is one stage in controlling sound and targets noise that is derived from panel resonance.
Stage 2 products target droning and other external noises.

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Vehicle Information
Lift Height0-2 inch|3 inch|4 inch|5 inch|6 inch|6 plus inch