facebookInstagramTikTokYou Tube
Sale

REDARC THE MANAGER30 Battery Management System (Each) - BMS1230S3

Brand:  Redarc Product ID:  40358
SKU:  BMS1230S3
     (This item could be out of stock. If it is, we will contact you after your order is placed. Alternately, please contact us to check current stock levels.)
RRP:  $2,004.00
Special Price:  $1,944.00  (Each)
SAVE:  $60.00

Supply Only Price.

-+
|
Universal Product Banner

REDARC THE MANAGER30 Battery Management System (Each) - BMS1230S3

The next generation Manager30 S3 model is the complete battery management system for charging auxiliary batteries used in recreational automotive and marine applications. The dual battery system incorporates AC, DC and solar inputs to achieve the best charge for an auxiliary battery.

Developed with ease of installation in mind, The Manager30 is compatible with all vehicles and alternator systems including variable voltage alternators.

Whether you’re charging Lead Acid, Gel, Calcium, AGM or Lithium Iron Phosphate batteries, The Manager30 represents a complete DC to DC charging and maintenance solution. If you’re charging one auxiliary battery or more, The Manager30 will ensure they’re always fully charged, providing peace of mind when battery charge provides the power source for the comforts of home whilst travelling around Australia.

The Manager30 operates like 6 separate products, it charges an auxiliary battery from the vehicle while on the move, it’s a 240-volt charger, a solar regulator, a battery isolator, a load disconnect controller, all with a remote battery monitor, making it market-leading.

Charging lithium batteries

Lithium batteries have improved storage capacity relative to size and weight. They do however require specific charging conditions in order to operate correctly and the battery itself must have an in-built cell management system. REDARC have designed a charging profile within The Manager30 to complement these in-built systems.

Green power priority

The Manager30 is designed to charge an auxiliary battery from multiple sources simultaneously. If 12-volt solar power is available, solar power will be used before topping up the output charging current from another source mains (if available) or DC vehicle power when on the move.

MPPT solar regulator

The built-in Maximum Power Point Tracking (MPPT) solar regulator allows The Manager30 to deliver the maximum amount of power from portable solar panels, even during low light conditions.

Remote monitor

Designed to show you auxiliary battery information and charge status. You can customise how your battery is charged and monitor where the charge is coming from. A user-friendly, graphical display monitor lets you know what’s going on, keeping you in control at all times.

Features

  • Multi-Stage AC-DC Battery Charger
  • Multi-Stage DC to DC Charger
  • Maximum Power Point Tracking Solar Regulator
  • Battery Monitor
  • Dual Battery Isolator
  • Load Disconnect Controller
  • Super quiet operation
  • Charges AGM, Gel, Calcium content, VRLA, Standard Lead Acid and Lithium (LiFePO4) batteries
  • Tested to mains power safety standards in Australia

      • Specifications

      Output System Voltage12VDC
      Maximum Charging Voltage16.0V* (*Calcium setting in storage mode)
      Output Current Rating (Cont.) 30A
      Output Power520W
      Input Fuse Rating50A
      Output Fuse Rating40A
      Warranty2 Years
      ProtectionShort Circuit, Surge, Reverse Polarity, Overload
      Input (Operating) Voltage 240VAC / 9 - 32VDC
      Length (mm)445
      Width (mm)185
      Height (mm)79
      Weight (kg)5.5
      AC Mains Plug TypeAU, NZ, EU
      Type ApprovalCE
      Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

      Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


      Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
      All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

      Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

      Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
      Vehicle Information
      Lift Height0-2 inch|3 inch|4 inch|5 inch|6 inch|6 plus inch