Profender 4x4 2 Inch (50mm) Lift 4x4 Monotube Shock 2.0 Inch Rear Suitable For Ford Ranger PXII/Mazda BT-50 (Each) - MG4-4045P

Brand: Profender 4x4	Product ID: 31319
SKU: MG4-4045P
Low Stock (This item could be out of stock. If it is, we will contact you after your order is placed. Alternately, please contact us to check current stock levels.)

$190.00 (Each)

Supply Only Price.

qty :

These shocks share the same specs as the Monotube Remote Reservoir Shock only without the reservoir.

The advantage here is not having to find a place to mount the reservoir.

Vehicles using these shocks can still perform very well in difficult terrains as there is still an ample amount of oil and gas to control the movement of the shock.

These Shocks just like the Remote Reservoir version are fully rebuildable and revalveable, to allow for tuning Suitable For your needs, and should the need arise to fix the shock should they become damaged

Fine adjustments can still be made by filling up or releasing Nitrogen in the shock body instead of the reservoir.

Min. Pressure 80 PSI
Max. Pressure 200 PSI
Pressure Set From Factory 150 PSI
46mm Piston with Teflon
20mm Super Polished Shaft
53mm Outer Body
Cr+3 Surface Finish

Profender 4x4 2 Inch (50mm) Lift 4x4 Monotube Shock 2.0 Inch Rear Suitable For Ford Ranger PXII/Mazda BT-50 (Each) - MG4-4045P


All bushes are made from durable rubber, rather then polyurethane.	Nitrogen pressures can be adjusted through the Schrader valve on the side of the main body

20mm super polished chrome shaft and high quality seals used throughout the range	Shocks are supplied with a protective rubber boot

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.

Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.