facebookInstagramTikTokYou Tube

Superior Coil Springs 3 Inch (75mm) Lift Rear 250kg Constant Load Suitable For Toyota Prado 120/150 Series (Pair) - SUP-CS3IN-250KG-P1250

Brand:  Superior Engineering Product ID:  44161
SKU:  SUP-CS3IN-250KG-P1250

$270.00  (Pair)

Supply Only Price.

-+
|

We are currently transitioning from Black to a Sliver finish on our coils, as such you may receive coils in either colour.
We will ensure where possible to supply sets of coils in the same colour and if you are concerned about what colour you will be supplied please contact us when you order to find out what colour we have for the coils you require.

Superior Engineering new coils, designed from the start purely for the best ride and performance available.

The design process started with on-vehicle measurements of the longest aftermarket shock for a given length, this data is then combined with the shock closed length and the suspensions actual physical limits.

Data is then combined with the highest grade of spring material offered in Australia, gives us the ability to produce the longest possible spring whilst still adhering to the required vehicle dimensions for a given lift height.

What this means is you have a longer, slightly softer more linear spring that is captive in the spring seat even when using the longest recommended shock.

By having a spring that is not only captive but linear rate at full extension you have good ground pressure even when at near full flex, which dramatically adds to vehicle stability when offroad.

The other major benefit of the longer, slightly softer rate is the far superior ride quality.

A short hard spring transmits forces from bumps back into the vehicle much more and doesn't allow the shock to actually do its jobs of controlling motion of the suspension.

The Superior Springs are designed around the same technology of the coilover race springs which when combined with a good shocks will provide unparalleled performance levels.

For vehicles which may carry loads at particular times we do recommended fitting Air-Bag assist.

This way both the ride and load carrying characteristics can be easily adjusted to suit any condition or load requirement.

Sold as a pair.

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Vehicle Information
Lift Height3 inch