20+ YRS EXPERIENCE IN THE 4WD INDUSTRY 
OVER 11,000 4WD PRODUCTS ONLINE 
20+ STOCKISTS AUSTRALIA WIDE 
SHIPPING AUSTRALIA WIDE & INTERNATIONALLY 
DSTRAC Ultra 70 Axle Set 35/40-Spline, High Pinion Suitable for Jeep JK - DTR-ULT70-3535-HPJK
| Brand: DSTRAC Performance 4x4 | Product ID: 45198 | |
| SKU: DTR-ULT70-3535-HPJK | ||
|
(This item could be out of stock. If it is, we will contact you after your order is placed. Alternately, please contact us to check current stock levels.)
| ||
$28,880.00 (Pair)
Supply Only Price.
-+
more info
|
Build for the harsh and extreme conditions that you can encounter in the offroad world.
Equipped with our housing DS76. Code 76 derives from an innovative housing design where a 60 or 70 ring can be mounted, but with a reduced external size.
In the 70 Ring and Pinion with a 10.5" diameter there is a 10,500Nm and 8000lbs capacity.
- Tires up to 43"
- Axle is complete bolt on with brackets and ABS retrofit.
- Heavy Duty 88.9mm/3.5" diameter, 11mm/0.43" wall axle tubes.
- DSTRAC size 70 Knuckles.
- DSTRAC 38mm/1.50" 35-spline 4340 Chromoly axleshafts
- DSTRAC 2.5ton style U-joints made of 4340 chromoly with self lubricant bushing caps
- F450-F550 Lower Ball joints (same used top/bottom) available around USA.
- DSTRAC Forged Yoke with size options
- Free Wheel manual locking 70 hubs mounted on forged axle sleeves made of high-alloy steel with double tapered bearings
- Vented rotor disc brake assemblies
- 8 lug (8 on 6.5") wheel pattern
- DSTRAC Abs retrofit (available for some models)
- HD Steel cover with magnetic bolt
- Special triple seal to prevent water and clay from entering the axle
- Heavy Duty 12.9" vented Rotors /4 Piston Disk brake assemblies
- DSTRAC DSlocker with 6 year warranty
- Tires up to 43"
- Axle is complete bolt on with brackets and ABS retrofit.
- Full float axle Design
- Heavy Duty 88.9mm/3.5" diameter, 11mm/0.43" wall axle tubes.
- DSTRAC 38mm/1.50" 35-spline 4340 Chromoly axleshafts or optional 40-spline 4340 Chromoly axleshafts.
- 70 hubs mounted on forged axle sleeves made of high-alloy steel with double tapered bearings
- Vented rotor disc brake assemblies
- 8 lug (8 on 6.5") wheel pattern
- DSTRAC Abs retrofit (available for some models)
- HD Steel cover with magnetic bolt
- Special triple seal to prevent water and clay from entering the axle
- Heavy Duty 11.6" Rotors Disk brake assemblies
- DSTRAC DSlocker with 6 year warranty
Pictures may vary from the product that you will receive.
Genuine/Non Genuine –
Advertised parts are not genuine (unless specifically stated) and manufacturer
references are for application purposes only.
Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.