facebookInstagramTikTokYou Tube
Sale

Tough Dog 1800kg GVM Upgrade Kit Suitable For Suzuki Jimny JB74 2019 on - TDGVM-084-XXX

Brand:  Tough Dog Product ID:  48248
SKU:  TDGVM-084-XXX

Note: Price includes Full Fitting and Approval at our Workshop in Burpengary QLD

Available Options
RRP:  $3,672.00
Special Price:  $3,562.00  (Kit)
SAVE:  $110.00

Price Includes Supply & Fitting.

-+
|

Note: Price includes Full Fitting and Approval at our Workshop in Burpengary QLD

Suzuki Jimny JB74 2019 on

Carry more - Safely & Legally

The allowable payload on most modern 4WDs seems great on paper but gets quickly eaten up when accessories, gear and passengers get loaded in.

Remaining under the vehicle's Gross Vehicle Mass (GVM) can seem like an impossible feat.

Tough Dog Suspension is a recognised Second Stage Manufacturer (SSM) which allows us to develop and federally certify components to increase your vehicle's GVM. Maximise your allowable payload without risking your roadworthiness!

Each complete GVM kit has been extensively tested to ensure ADR compliance is maintained.


Safety and performance by design

Federal approval for GVM upgrades requires rigorous testing to ensure that the vehicle performs as well or better than when it left the original manufacturer.

You can be sure that your Tough Dog GVM upgraded 4WD will stop and handle well, even with the increased load on board.

Depending on the vehicle, the following testing is required:

  • Finite Element Analysis (FEA) testing: A check of the maximum load-carrying capacity of the vehicle's axles.
  • Brake Testing: Laden and Unladen brake testing as well as testing under partial system failure to comply with ADR35/00
  • ESC Testing: If required, this test ensures that the ESC system's response is the same or better than the original vehicle.

    • The GVM of any vehicle is the weight in kilograms that the manufacturer has specified as being the maximum that the vehicle can weigh when fully laden. Tough Dog GVM upgrades allow a vehicle to be certified to carry a greater amount than the original manufacturer, without breaching applicable ADRs or laws.

    You can upgrade the GVM of a vehicle using either Federal approval or State based approval, depending on whether the vehicle has been registered or not.

    If the vehicle has never been registered, Federal approval can be applied. The Tough Dog GVM kit comes complete with an additional compliance plate which will be fixed to the vehicle.

    If the vehicle is already registered, the data used in Federal compliance is used in conjunction with a vehicle inspection by an authorised State engineer to certify the vehicle.

    Get up to an extra 365KG payload - Upgrade your GVM to 1800KG

    For warranty reasons, when fitting a lift kit you should always fill out a fitment form.

    Tough Dog 1800kg GVM Upgrade Kit Suitable For Suzuki Jimny JB74 2019 on

    Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

    Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


    Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
    All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

    Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

    Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
    Vehicle Information
    Lift Height0-2 inch