Superior Coil Conversion 2 Inch Rear Kit Suitable For Toyota Landcruiser 79 Series Gen 2 (VSC Models) (Fully Fitted)


Superior Coil Conversion 2 Inch Rear Kit suitable for Toyota Landcruiser 79 Series Gen 2 (VSC Models)

2nd Generation Design! Now supplied with Longer Lower Control Arms for better control of the diff when off-road.

Convert your leaf sprung Landcruiser 79 Series Dual Cab to a more compliant ride and better handling both on and offroad with one of our Superior Engineering Coil Conversion Kits, designed, tested and manufactured right here in Brisbane to suit all Australian conditions.
The kit is supplied with everything you need to convert your vehicle from leaves to coils, all brackets , mounts ,coils, shocks, control arms, brake lines as well.
The NCOP VSB pre-approval paperwork is also supplied, so you can legally have the Coil suspension fitted and approved on your vehicle.
The Coil Conversion kit utilises many original bolt locations to precisely place many of the brackets on the vehicle, allowing simple installation.

The Superior Engineering Weld-In coil conversion design was chosen to provide a more robust and longer lasting solution for the trusty Landcruiser workhorses.
We felt that a welded package that distributes the loads more evenly over almost 100% more chassis area than common bolt-in systems is exactly what Landcruiser owners deserve!
?LESS Expense , Less Maintenance and improved chassis strength is why - Welding is the preferred method. Who would want to drive to the cape over corrugated tracks and have to stop to check if your rear suspension is still bolted in all the time?

Once you drive on a coil rear 79 you won’t ever want to go back to leaf spung suspension! Do your spine a favour, and get the Superior Engineering Weld-In Coil Suspension.


We have developed this kit to be easy to install with full instructions and have done all the hard work and testing as well as performing accredited lane change tests (Check out the video below) and the Design pre-approval under the VSB LS Codes.
This kit will be welded by a qualified boilermaker or welder (AS1554.1 certified) and fitted by a suitably qualified suspension fitter.
Once this coil conversion is fitted the vehicle will be assessed by an approved modification plate officer, they will inspect that the vehicle has the suspension fitted in accordance with the supplied instructions and is welded correctly and to an acceptable standard. The inspector/ officer will then plate the vehicle with an LS6 approval code.
As with all modification and aftermarket accessories, it is recommended to confirm all modifications in writing with your insurance company as some policies or providers may not accept such modifications although street legal.

This kit is supplied with 2" Superior Nitro Gas Shocks and Coils Suitable For your requirements.
You can also upgrade to Superior Engineering Remote Reservoir Shocks for an extra charge.

This is a full kit fitted and approved at our Workshop

NOTE: Exhaust mods are not included in this price and will have to added to the final cost, the exhaust will need the be modified from the rear control arm mount back.

The stated price is based on the vehicle supplied to us for fitment in OE Cab-chassis configuration. Due to the wide range of trays, bodies and accessories available, a quote will be provided to remove and refit any items that may be already fitted to the vehicle in the area of the coil conversion. Modification to other items such as sliders, side-steps and towbar mountings can also be performed and will be quoted upon inspection and presentation of the vehicle for fitting. The modification or re-connection of auxiliary wiring or air-lines not related to the coil conversion is up to the customer, unless otherwise instructed. Superior Engineering can arrange the supply, fitment or installation of other items at the same time such as Widetrack kits, Lockers, Airbags, etc. these items will need to be organized with your sales consultant at the time of purchase as delivery and fitting times will need to be agreed/organized.

Please note: During the fitment process, the customer will be notified if items are discovered to have mechanical or maintenance issues, such as over worn brakes and driveline components with excessive play that may require replacement or mechanical attention. These may be required to be rectified prior to the approval process and presentation of a completed vehicle.

Please present the vehicle in a clean, mechanically and structurally sound condition. Excessively dirty, damaged/bent, modified or corroded chassis’ will require additional labor and thus may incur extra costs. Non-OE Items, accessories or coating’s added to the chassis may also require additional work to remove &/or refit.

FEATURES & HIGHLIGHTS

  • Street Legal & Compliant, Approval Under VSB LS Codes
  • Weld-In Kit Featuring 4 x Chassis Side Strengthening Braces
  • Heavy Duty Sway bar & Coil Tower Brace
  • Uses Factory Mounting Locations For A Precise Fit
  • Supplied Pre-Fabricated For An Easy Installation
  • Improved Roll Axis For Tyre Clearance
  • Increased Wheel Travel & Articulation
  • Adjustable Upper Control Arms
  • 40mm OD Fixed Lower Control Arms
  • Reduced Bush Bind Over A 5-Link
  • Compatible with Coil Air Bags
  • 4-Link Rear Suspension Setup
  • Fully Adjustable Pinion Angle
  • Provides More Precise Handling
  • Improved Comfort & Ride
  • 350 Grade Steel Mounts
  • Supplied with Shocks, Coils and Sway Bar
  • Will work on up to 5” lift

Kit Contains

Coil Springs
Nitro Gas Shock Absorbers
Side Chassis Brace
Sway Bar Kit
Upper Control Arm Mounts (Diff and Chassis)
Lower Control Arm Fixed Pins
Lower Control Arm/Shock Mount
Coil Tower/Bracing
Lower Coil Mounts
Upper Adjustable Control Arms
Lower Control Arms
Handbrake Relocation Bracketry
All Required Bolts and Fasteners

Vehicle Information
Lift Height 0-2 inch

Disclaimer

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.

Latest Blog

Read more

New South Coast NSW Superior Engineering Stockist All Barred 4x4

Superior Engineering is proud to announce All Barred Up 4x4 as a NEW authorised Stockist for Sout...

Read more

79 Series Landcruiser HyperFlex Radius Arms

Superior Engineering is proud to announce the release of the amazing new 79 Series Landcruiser Hy...

Read more

Ford PXII Ranger Coil Conversion Kits

Convert your leaf spring PXII Ranger to a coil spring with one of our Coil Conversion Kits. Suppl...

Read more

Superior Engineering May Long Weekend Social Wheel

Come and join Superior Engineering and Powercurve Performance at our May Long Weekend Social Whee...

Read more

New QLD Stockist NDM Bosch Auto Services

Superior Engineering is proud to announce NDM Bosch Auto Services as a NEW authorised Stockist fo...

Read more

Hyperflex Hybrid Radius Arm with Drop Boxes to suit the Nissan Patrol GQ/GU

Superior Engineering is proud to announce the release of the amazing new Hyperflex Hybrid Radius ...

This page was generated in 1,537,350,513.8497 seconds.