PLEASE READ: There are options for Pre and Post Registration.
Pre Registration is for vehicles that not have been previously registered in any Australian State.
Post Registration is for vehicles that have been previously or are currently registered.
NOTE: all GVM/BTC kits must be fitted by Superior Engineering.
The usable payload of many 4X4 vehicles today is minimal. Additional basic optional equipment and two or three adult male occupants will bring the vehicle close to its legal maximum weight (GVM) in many cases. Add long range fuel tanks, bull bars, winches, side steps, roof racks, recovery gear and a payload of camping equipment or an industrial type custom body and the vehicle will ultimately exceed the Original Equipment allowable Gross Vehicle Mass.
Original Equipment suspension is designed for comfort above all other considerations, thus load carrying and performance can be compromised. Whereas, Lovells design suspension systems with matched components for the ultimate in performance, load carrying, and handling.
Lovells GVM Upgrade suspension kits are fully track tested in conjunction with a Certified Automotive Engineering Signatory over many days to achieve maximum stability, braking performance, ADR (Australian Design Rules) conformity and operator comfort, before test data and documentation are forwarded to the DEPARTMENT of INFRASTRUCTURE, TRANSPORT, REGIONAL DEVELOPMENT and LOCAL GOVERNMENT for full analysis.
The National Codes and laws that must be met are extremely stringent and it can take up to 6 months for all data to be analysed in full by the Road Safety Engineers in Canberra. Once the Department is satisfied with all dynamic testing and theoretical data, it is only then that Lovells are issued with certification of Secondary Manufacture for GVM Upgrades.
Lovells GVM Upgrade Kits provide a solution for owners/managers of Toyota Landcruiser, Toyota Hilux, Nissan Patrol and other vehicles who have a need to carry loads which exceed the Original Equipment GVM specifications while at the same time meeting the practical and documentary compliance requirements of Work Safety, Police Licensing, Insurance, Lessors and Fleet Managers.
Lovells hold Compliance Plate Approval’s as a Second Stage Manufacturer of GVM Upgrades for Toyota, Nissan, Isuzu, Ford and Mazda
Image is for sample only actual content may vary(see parts lift for actual content)
2 Front Coil Springs- Raised (GVM)- (Diesel Engine)
2 Rear Coil Springs- Raised (GVM)
2 Rear Coil Springs- Constant Load (GVM)
2 Front Gas Legend Strut
2 Rear Gas Legend Shock Absorber
1 3800kg Compliance Plate
1 KDSS Valve Adjustment Warning Decal
1 3800kg Tyre Loading Placard (Decal)
1 x Owners Manual
|Lift Height||All Heights|