facebook Instagram You Tube Linkedin Twitter

Ironman 4x4 Maxi Case 60L (Each)

BrandIronman 4x4
Product ID30488
+-
RRP : $195.00
SALE Price : $156.00  (Each)
SAVE : $39

Supply Only Price
(Unless stated otherwise above)

|

NOTE: This product is a universal fitment and may not suit all applications, please contact us if you are unsure if it is suitable.

Ironman 4x4 has redeveloped their range of portable plastic storage cases.
The new design is to maximise strength, maximise our new dust and water seal and maximise longevity.

Ironman 4x4 Maxi cases are the perfect for the tradie, camper, ute owner and outback traveller. Made from tough LLDPE UV stabilised plastic and will not rust.

Ironman 4x4 Maxi Cases are loaded with features such as:

  • Extra strong case design
  • Dust and water resistant boxes - safe for tools and camping gear
  • Lockable heavy duty latches
  • Large dust and water seal
  • Integrated handles that can’t be pulled out or broken
  • Spring loaded handles / tie down points
  • Removable tool / storage tray*
  • Tie down points which allow for the lid to still be opened when in use
  • Strap over points for added security when in transit.
  • Average wall thickness: 3.6mm

They are stackable and interlock securely when stacked regardless of what size is being stacked.

The lid is reinforced to ensure maximum connectivity and doubles as a handy seat at the work site. They also have super strong moulded integrated hinges.

Available in 48L, 60L, 100L, 140L and the giant 216L model.

*48L doesn’t include removable tool/storage tray.

Dimensions:
55cm (L) x 46cm (W) x 33.5cm (H)

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.



QCOP/NCOP VSB14/VSB6 - When a Superior Engineering product is advertised as approved for use, it has been approved under the QCOP/NCOP VSB14/VSB6 guidelines and a design approval has been produced within the state of manufacture.
While the NCOP VSB14 rules have been technically accepted in many states and a Design Approval in one state is considered valid in another, in Victoria (and some states) an Approval Engineer is allowed to compile any additional data they may feel necessary to satisfy compliance.
As this data is outside the nominal minimum requirements (NCOP VSB14) in most states, this information is to be gathered by the customers contracted approval engineer at their expense.
Superior Engineering has engaged a wide network of Certified Professional Engineers throughout Australia to help customers with the approval processes. These Engineers have immediate access to Superior Engineering’s design and test data and are registered transport approval facilities within their respective states.
Should an independent Approval Engineer require specific data, Superior Engineer asks that they engage our Engineer in writing to contract him to Assess and Compile Engineering information, pertinent to each customer's requirements.
The level of data can vary widely and due to the sensitivity and incorrect use or application of test data, Superior Engineering will often refer customers to Engineering approved persons, that have the information and knowledge to perform the approval in the most effective and economical manner for the customer.
Vehicle Information
Lift Height All Heights