facebookInstagramTikTokYou Tube

Superior Anti-Inversion Extended Shackles 2 Inch (50mm) Suitable For Nissan Patrol MQ Front (Pair) - MQEXSHF

Brand:  Superior Engineering Product ID:  1483
SKU:  MQEXSHF

$260.00  (Pair)

Supply Only Price.

-+
|

These are Superior Anti-Inversion Extended shackles are suitable for the front of the MQ Nissan Patrol with a 2" inch lift.

Superior Engineering shackles feature an anti-inversion design to stop the springs being damaged when the shackles are hit into obstacles.

NOTE: 3-degree caster wedges should also be purchased and fitted in the front when using extended shackles.

Extended shackles have 2 purposes, one is to give you more height and the other is to assist in wheel travel. The longer a shackle is the more wheel travel you will get, dependent on such factors as spring design and shock length.

Superior Engineering Extended shackles come with Greasable High Tensile Pins that are Case Hardened, they are coated in a 7 part process SA5 Anti-Corrosion Zinc finish, approx 2 inch over standard in height and the pins are pressed and welded to create the strongest extended shackle on the market!

One other major benefit of a Superior Engineering Shackle is you don't need to purchase special size bushes as we have retained the factory size pins so you standard bushes will fit them and you can source your bushes from anywhere.

Superior Engineering is the only Company that incorporates the welded pins into our design and this totally stops any sideways flexing that ultimately will lead to the shackle failure and premature wear of the shackle plates and they also incorporate the 'Step Bolt' design so the shackles can be properly tightened to ensure the exact tolerance between the bushes in maintained.

Front and rear shackles are the same.

Sold as a pair (one end of a vehicle, eg either front or rear).

Superior Anti-Inversion Extended Shackles 2 Inch (50mm) Suitable For Nissan Patrol MQ Front (Pair) - MQEXSHF


Video Transcription

Hi, I am Mick from Superior Engineering.

Today I want to show you our new seventy-six series extended shackles.

There is a few great things about these shackles, one is we use ten-millimetre steel.

Standard shackles are only six-millimetre steel, so these are a lot stronger and they really have to be because we are going extended, so they're about two inches longer than factory.

We do an SA5 zinc coating on them, so you can go to the beach or where ever you want to go and they're not going to go rust on you.

We use high tensile eighteen-millimetre pins here so they will take the standard bushes.

Grease fitting we have, so obviously your suspension moves nice and smoothly.

In the back of it, there is an anti-inversion bolt.

Now that bolt there is to actually stop your suspension travelling too far if you back your vehicle upon say a LandCruiser and hit a stump or something there is the opportunity your shackle will go too far and bend your springs.

That will actually stop that happening.

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Vehicle Information
Lift Height0-2 inch|3 inch|4 inch|5 inch|6 inch|6 plus inch