facebookInstagramTikTokYou Tube

Superior Hyperflex Radius Arms Suitable For Toyota LandCruiser 80/105 Series (Pair) - HYPRARM80-XXX

Brand:  Superior Engineering Product ID:  33109
SKU:  HYPRARM80-XXX

PLEASE BE ADVISED: Fitment of Superior Superflex & Hyperflex Arms for Landcruiser requires permanent removal of the OE Sway Bar Mounts from your Diff Housing.

Superior Superflex & Hyperflex Arms for Landcruiser are provided with suitable provisions to re-install your OE Sway Bar once the arms are installed.

If you have questions regarding the installation process, please call our sales team (07) 5433 1411 to confirm before ordering.

Please Select From Series:
2 Inch (50mm) Castor Correction
3 Inch (75mm) Castor Correction
4 Inch (100mm) Castor Correction
5 Inch (125mm) Castor Correction
6 Inch (150mm) Castor Correction
7 Inch (175mm) Castor Correction
    
(Please select a product option above for the stock level indicator)

$1,874.00  (Pair)

Supply Only Price.

-+
|

600% Stronger then H-Beam Radius Arms

Lifetime Warranty

This is a Superior Engineering Hyperflex Hybrid Radius Arm Suitable For Toyota Land Cruiser 80 Series/105 Series.

Superior Engineering is leading the way again with our latest radius arms design, the Hyperflex Radius Arm.
We figured if one of our Patented Superflex was good then why not run two, and after some testing we are now proud to offer the Hyperflex Radius Arms for 80 series & 105 series Landcruisers.

If you're looking for the ultimate 80 series radius arms or 105 series radius arms, these are for you.


Our hyperflex radius arms don't just offer extreme levels of flex for the front of your LandCruiser 80 Series/105 Series, the also handle extremely well on road.

With our 80/105 series Landcruiser radius arms, we supply fitting instructions and all the bushes are pressed into the arms so you don’t have to.

With these arms, you will get the flex and drivability you need, and longer life from your bushes. Why not have extra flex as well as good on-road handling?


Benefits of Superior Engineering HYPERFLEX Drop Radius Arms

  • Manufactured from High Tensile Plate
  • High Tensile Bush Eyes
  • Massive 32mm main Beam thickness for maximum strength
  • Rubber Bushes pre- fitted into arms
  • Laser cut to precise measurement and caster location
  • Authentic Superior Engineering Logo machined into side of Arms
  • (Factory Sway bar will fit to allow safe on road handling)
  • The Brackets to fit the sway bar are supplied at no extra cost
  • They are manufactured Suitable For various lifts
  • Sand blasted with rust prevention applied
  • Powder Coated for maximum durability and finish
  • High Tensile Plate will not crack unlike Cast Radius Arms
  • Adapter plates and bolts have a SA5 Zinc coating for rust prevention
  • Allows vehicle to track correctly on road due to correct caster
  • Maximum Clearance between the Tie Rod and the Radius Arms
  • Factory bushes fit the HYPERFLEX ARMS, We don't use special sizes Bushes
  • Superior Engineering's Super flex arms are a Patented Design
  • Patent No's. 2008202797, 2010100451, 2011904187
  • 100% money back Guarantee if you don't get more flex than your original or aftermarket Radius Arms !

Superior Hyperflex Radius Arms Suitable For Toyota LandCruiser 80/105 Series (Pair) - HYPRARM80-XXX

Fig. 1 shows the Superior Arm deflecting only 4.1mm under load with real world load points.
Fig. 2 shows the Competitor's Arm deflecting 24.91mm under the same load points and loads, almost the same as the width of the Arm itself.
Also of note is the Competitor's Arm deflected to a point that may cause metal fatigue over time, which may lead to total failure.

 Superior Hyperflex Radius Arms Suitable For Toyota LandCruiser 80/105 Series (Pair) - HYPRARM80-XXX

Cast radius arms are more vulnerable to breaking, leaving your vehicle undrivable and you stranded.

In the event of a major crash or major impact Superior Engineering Radius arms may bend but will never crack and fail

Superior Hyperflex Radius Arms Suitable For Toyota LandCruiser 80/105 Series (Pair) - HYPRARM80-XXX

 

Below is a comparison chart showing different forms of Castor correction and how they compare in Cost, Flex, Handling and Offroad Ability.

Suspension component performance chart


Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Vehicle Information
Lift Height0-2 inch|3 inch|4 inch|5 inch|6 inch