facebook Instagram You Tube Linkedin Twitter

GME TX3100VP UHF Two Way CB Radio Starter Kit

GME TX3100VP UHF Two Way CB Radio Starter Kit
BrandGME
Product ID26885
+-

$330.00  (Each)

zip own it now,pay later
|

Everything you need to get you started

With GME’s TX3100 Starter Kit, you’ll begin your UHF CB experience with everything you need from the get-go.

The TX3100 super compact size and power, combined with its ease of use, makes it a perfect UHF CB radio for all types of users.

Coupled with the AE4018K2 high performance antenna and MB407SS mounting bracket, this Starter Kit is all you’ll need in the one box!

Product Details:

  • Includes the TX3100DP UHF CB Radio (Only TX3100DP is made in Australia)
  • Includes the AE4018K2 High Performance Antenna and Cable (12 months warranty on this item)
  • Includes the MB407SS Mounting Bracket (12 months warranty on this item)

In the Box:

  • TX3100 5 watt UHF CB radio
  • Radio mounting bracket and screw pack
  • Microphone and microphone clip
  • DC power lead
  • MB407SS antenna mounting bracket
  • AE4018K2 antenna assembly

Product Specifications:

GENERAL
Compliant Specification Meets AS/NZS 4365 for radio communications equipment in the UHF citizen and personal radio service.
Frequency Range TX 403-520MHz
Number of Channels 80 UHF CB
Channel Spacing 12.5 kHz
Operation Mode Simplex channels 1–80 Semi Duplex channels 1–8, 41–48.
Scanning Speed 20 channels per second
Antenna Impedance 50 Ohms nominal
Nominal Battery Voltage 13.8 volts DC
Operating Voltage Range 10–15 volts DC
Overvoltage Protection 25 volts DC max. At 18 volts DC the RF power is reduced, and the words ‘Hi DC’ flash.
Overcurrent Protection In-line 2A Fuse
Frequency stability ±2.5 PPM
TRANSMITTER
RF Output 5.0 watts max.
Spurious Emission <-70 dBc
Modulation FM
Maximum Deviation <± 2.5 kHz at + 20 dB limiting
Transmit Frequency Response +6 dB per octave 300 Hz to 3 kHz + 1-3 dB.
Current Consumption 1.5 amps with 50 Ohms termination
RECEIVER
Intermediate Frequencies 1st -38.85 MHz 2nd -450 kHz
Sensitivity -123 dBm for 12 dB SINAD unweighted
Selectivity -6 dB at + 3.5 kHz ‑60 dB at ± 12.5 kHz
Intermodulation Immunity 73 dB
Blocking Immunity 100 dB
Spurious Response Immunity 70 dB
Audio Output Power 70 dB
Audio Signal to Noise >45 dB
Current consumption < 180 mA muted 600 mA @ max. A.F output
Conducted Spurious Emission <-57 dBm
MECHANICAL SPECIFICATIONS
Dimensions 102 (W) x 87 (D) x 23 (H) mm
Weight 158 grams
Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Vehicle Information
Lift Height All Heights